Home / PFPE
Perfluoropolyethers (PFPE), K-type
One inert chemistry, from 0.77 cSt fluids to 3,500 cSt oils
Electronic fluids for heat transfer, vapor phase soldering and leak testing, and lubricant oils for bearings and vacuum pumps. No flash point, non-toxic, chemically inert.
The number of repeat units n sets the molecular weight: 1,500 to 11,000 amu across the oil series.
KL-E electronic fluids
Pick the boiling point, keep the dielectric
Low-molecular-weight PFPE fluids. Every grade has the same electrical properties; boiling point and viscosity rise with the grade number.
- Heat transferChillers for etch, CVD and implant tools
- Precision temperature controlTest handlers and thermal shock chambers
- Vapor phase solderingThe boiling point sets the soldering temperature
- Leak testingGross and fine leak tests for sealed electronics
Liquid range, pour point to boiling point
Select a grade to see its dataKL-E110
Comparable to: Galden® HT110- Boiling point
- 110 °C
- Pour point
- -110 °C
- Density
- 1.73 g/mL
- Kinematic viscosity
- 0.77 cSt
- Vapor pressure
- 6.5 kPa
- Surface tension
- –
- Heat of vaporization at boiling point
- –
- Specific heat
- 960 J/(kg·K)
- Refractive index
- 1.29
- Acid value
- < 30 ppm
All values at 25 °C unless stated.
KL-E135
Comparable to: Galden® HT135- Boiling point
- 135 °C
- Pour point
- -100 °C
- Density
- 1.76 g/mL
- Kinematic viscosity
- 1.1 cSt
- Vapor pressure
- 1.0 kPa
- Surface tension
- 13.5 dyn/cm
- Heat of vaporization at boiling point
- –
- Specific heat
- 960 J/(kg·K)
- Refractive index
- 1.29
- Acid value
- < 30 ppm
All values at 25 °C unless stated.
KL-E165
Comparable to: Galden® HT170- Boiling point
- 165 °C
- Pour point
- -90 °C
- Density
- 1.78 g/mL
- Kinematic viscosity
- 1.75 cSt
- Vapor pressure
- 0.1 kPa
- Surface tension
- 18 dyn/cm
- Heat of vaporization at boiling point
- 16 cal/g
- Specific heat
- 960 J/(kg·K)
- Refractive index
- 1.29
- Acid value
- < 30 ppm
All values at 25 °C unless stated.
KL-E200
Comparable to: Galden® HT200- Boiling point
- 200 °C
- Pour point
- -85 °C
- Density
- 1.82 g/mL
- Kinematic viscosity
- 2.65 cSt
- Vapor pressure
- 0.02 kPa
- Surface tension
- 19 dyn/cm
- Heat of vaporization at boiling point
- 15 cal/g
- Specific heat
- 960 J/(kg·K)
- Refractive index
- 1.29
- Acid value
- < 30 ppm
All values at 25 °C unless stated.
KL-E230
Comparable to: Galden® HT230- Boiling point
- 230 °C
- Pour point
- -75 °C
- Density
- 1.84 g/mL
- Kinematic viscosity
- 4.2 cSt
- Vapor pressure
- < 0.01 kPa
- Surface tension
- 19 dyn/cm
- Heat of vaporization at boiling point
- 15 cal/g
- Specific heat
- 960 J/(kg·K)
- Refractive index
- 1.29
- Acid value
- < 30 ppm
All values at 25 °C unless stated.
KL-E270
Comparable to: Galden® HT270- Boiling point
- 270 °C
- Pour point
- -70 °C
- Density
- 1.85 g/mL
- Kinematic viscosity
- 13.5 cSt
- Vapor pressure
- < 0.01 kPa
- Surface tension
- 19 dyn/cm
- Heat of vaporization at boiling point
- 15 cal/g
- Specific heat
- 960 J/(kg·K)
- Refractive index
- 1.29
- Acid value
- < 30 ppm
All values at 25 °C unless stated.
- Dielectric strength
- > 40 kV
- Dielectric constant, 1 kHz
- < 2
- Volume resistivity
- > 10¹³ Ω·cm
- Flash point
- None
KL-L lubricant oils
Choose by the temperature it has to survive
Heavier grades run hotter and evaporate less; lighter grades stay fluid in the cold.
11 of 14 grades cover this temperature
Bars show the service temperature range. The white line is the temperature you set.
KL-L18
Service temperature: -70 – 104 °C
- Average molecular weight
- 1,500 amu
- Viscosity, 20 °C
- 18 cSt
- Viscosity, 40 °C
- 8 cSt
- Viscosity, 100 °C
- 2 cSt
- Viscosity index
- –
- Pour point
- -70 °C
- Density, 0 °C
- 1.89 g/mL
- Density, 100 °C
- 1.70 g/mL
- Evaporation loss, 22 h
- 66 °C: 2%, 121 °C: 80%
- Closest Krytox™ GPL by viscosity
- Krytox™ GPL 101
Comparisons are indicative. Check the TDS before you switch.
KL-L28
Service temperature: -65 – 132 °C
- Average molecular weight
- 1,650 amu
- Viscosity, 20 °C
- 28 cSt
- Viscosity, 40 °C
- 12 cSt
- Viscosity, 100 °C
- 2.5 cSt
- Viscosity index
- –
- Pour point
- -65 °C
- Density, 0 °C
- 1.90 g/mL
- Density, 100 °C
- 1.71 g/mL
- Evaporation loss, 22 h
- 66 °C: 2%, 121 °C: 30%
- Closest Krytox™ GPL by viscosity
- –
Comparisons are indicative. Check the TDS before you switch.
KL-L38
Service temperature: -60 – 132 °C
- Average molecular weight
- 1,800 amu
- Viscosity, 20 °C
- 38 cSt
- Viscosity, 40 °C
- 15 cSt
- Viscosity, 100 °C
- 3 cSt
- Viscosity index
- 54
- Pour point
- -60 °C
- Density, 0 °C
- 1.91 g/mL
- Density, 100 °C
- 1.72 g/mL
- Evaporation loss, 22 h
- 66 °C: 2%, 121 °C: 20%
- Closest Krytox™ GPL by viscosity
- Krytox™ GPL 102
Comparisons are indicative. Check the TDS before you switch.
KL-L60
Service temperature: -50 – 154 °C
- Average molecular weight
- 2,300 amu
- Viscosity, 20 °C
- 60 cSt
- Viscosity, 40 °C
- 22 cSt
- Viscosity, 100 °C
- 4 cSt
- Viscosity index
- 73
- Pour point
- -50 °C
- Density, 0 °C
- 1.92 g/mL
- Density, 100 °C
- 1.74 g/mL
- Evaporation loss, 22 h
- 66 °C: 1%, 121 °C: 6.5%, 149 °C: 20%
- Closest Krytox™ GPL by viscosity
- Krytox™ GPL 103
Comparisons are indicative. Check the TDS before you switch.
KL-L160
Service temperature: -45 – 179 °C
- Average molecular weight
- 3,000 amu
- Viscosity, 20 °C
- 160 cSt
- Viscosity, 40 °C
- 60 cSt
- Viscosity, 100 °C
- 8 cSt
- Viscosity index
- 112
- Pour point
- -45 °C
- Density, 0 °C
- 1.93 g/mL
- Density, 100 °C
- 1.75 g/mL
- Evaporation loss, 22 h
- 66 °C: 1%, 121 °C: 1%, 149 °C: 2%
- Closest Krytox™ GPL by viscosity
- Krytox™ GPL 104
Comparisons are indicative. Check the TDS before you switch.
KL-L250
Service temperature: -40 – 204 °C
- Average molecular weight
- 3,600 amu
- Viscosity, 20 °C
- 250 cSt
- Viscosity, 40 °C
- 80 cSt
- Viscosity, 100 °C
- 10 cSt
- Viscosity index
- 115
- Pour point
- -40 °C
- Density, 0 °C
- 1.94 g/mL
- Density, 100 °C
- 1.76 g/mL
- Evaporation loss, 22 h
- 149 °C: 1%, 204 °C: 2%
- Closest Krytox™ GPL by viscosity
- –
Comparisons are indicative. Check the TDS before you switch.
KL-L470
Service temperature: -37 – 260 °C
- Average molecular weight
- 4,800 amu
- Viscosity, 20 °C
- 470 cSt
- Viscosity, 40 °C
- 150 cSt
- Viscosity, 100 °C
- 16 cSt
- Viscosity index
- 125
- Pour point
- -37 °C
- Density, 0 °C
- 1.94 g/mL
- Density, 100 °C
- 1.77 g/mL
- Evaporation loss, 22 h
- 149 °C: 0.5%, 204 °C: 1.5%
- Closest Krytox™ GPL by viscosity
- Krytox™ GPL 105
Comparisons are indicative. Check the TDS before you switch.
KL-L710
Service temperature: -35 – 288 °C
- Average molecular weight
- 5,800 amu
- Viscosity, 20 °C
- 710 cSt
- Viscosity, 40 °C
- 215 cSt
- Viscosity, 100 °C
- 22 cSt
- Viscosity index
- 133
- Pour point
- -35 °C
- Density, 0 °C
- 1.95 g/mL
- Density, 100 °C
- 1.78 g/mL
- Evaporation loss, 22 h
- 149 °C: 0.5%, 204 °C: 1%
- Closest Krytox™ GPL by viscosity
- –
Comparisons are indicative. Check the TDS before you switch.
KL-L900
Service temperature: -30 – 300 °C
- Average molecular weight
- 6,100 amu
- Viscosity, 20 °C
- 900 cSt
- Viscosity, 40 °C
- 260 cSt
- Viscosity, 100 °C
- 27 cSt
- Viscosity index
- 135
- Pour point
- -30 °C
- Density, 0 °C
- 1.95 g/mL
- Density, 100 °C
- 1.78 g/mL
- Evaporation loss, 22 h
- 204 °C: 0.3%
- Closest Krytox™ GPL by viscosity
- Krytox™ GPL 106
Comparisons are indicative. Check the TDS before you switch.
KL-L1600
Service temperature: -25 – 300 °C
- Average molecular weight
- 7,000 amu
- Viscosity, 20 °C
- 1,600 cSt
- Viscosity, 40 °C
- 460 cSt
- Viscosity, 100 °C
- 42 cSt
- Viscosity index
- 144
- Pour point
- -25 °C
- Density, 0 °C
- 1.95 g/mL
- Density, 100 °C
- 1.78 g/mL
- Evaporation loss, 22 h
- 204 °C: 0.2%, 260 °C: 0.8%
- Closest Krytox™ GPL by viscosity
- Krytox™ GPL 107
Comparisons are indicative. Check the TDS before you switch.
KL-L1820
Service temperature: -25 – 300 °C
- Average molecular weight
- 8,500 amu
- Viscosity, 20 °C
- 1,820 cSt
- Viscosity, 40 °C
- 510 cSt
- Viscosity, 100 °C
- 47 cSt
- Viscosity index
- 148
- Pour point
- -25 °C
- Density, 0 °C
- 1.95 g/mL
- Density, 100 °C
- 1.78 g/mL
- Evaporation loss, 22 h
- 204 °C: 0.2%, 260 °C: 0.8%
- Closest Krytox™ GPL by viscosity
- –
Comparisons are indicative. Check the TDS before you switch.
KL-L2300
Service temperature: -25 – 300 °C
- Average molecular weight
- 9,000 amu
- Viscosity, 20 °C
- 2,300 cSt
- Viscosity, 40 °C
- 660 cSt
- Viscosity, 100 °C
- 58 cSt
- Viscosity index
- 153
- Pour point
- -20 °C
- Density, 0 °C
- 1.95 g/mL
- Density, 100 °C
- 1.78 g/mL
- Evaporation loss, 22 h
- 204 °C: 0.1%, 260 °C: 0.7%
- Closest Krytox™ GPL by viscosity
- –
Comparisons are indicative. Check the TDS before you switch.
KL-L2600
Service temperature: -15 – 350 °C
- Average molecular weight
- 10,000 amu
- Viscosity, 20 °C
- 2,600 cSt
- Viscosity, 40 °C
- 750 cSt
- Viscosity, 100 °C
- 65 cSt
- Viscosity index
- 157
- Pour point
- -15 °C
- Density, 0 °C
- 1.95 g/mL
- Density, 100 °C
- 1.78 g/mL
- Evaporation loss, 22 h
- 260 °C: 0.6%
- Closest Krytox™ GPL by viscosity
- –
Comparisons are indicative. Check the TDS before you switch.
KL-L3500
Service temperature: -5 – 360 °C
- Average molecular weight
- 11,000 amu
- Viscosity, 20 °C
- 3,500 cSt
- Viscosity, 40 °C
- 1,000 cSt
- Viscosity, 100 °C
- 88 cSt
- Viscosity index
- 171
- Pour point
- -5 °C
- Density, 0 °C
- 1.95 g/mL
- Density, 100 °C
- 1.78 g/mL
- Evaporation loss, 22 h
- 260 °C: 0.5%
- Closest Krytox™ GPL by viscosity
- –
Comparisons are indicative. Check the TDS before you switch.
Evaporation loss at a glance
ASTM D972, 22 hours. Darker cells lose more. A dash means the grade is not rated at that temperature.
| Grade | 66 °C | 121 °C | 149 °C | 204 °C | 260 °C |
|---|---|---|---|---|---|
| KL-L18 | 2% | 80% | – | – | – |
| KL-L28 | 2% | 30% | – | – | – |
| KL-L38 | 2% | 20% | – | – | – |
| KL-L60 | 1% | 6.5% | 20% | – | – |
| KL-L160 | 1% | 1% | 2% | – | – |
| KL-L250 | – | – | 1% | 2% | – |
| KL-L470 | – | – | 0.5% | 1.5% | – |
| KL-L710 | – | – | 0.5% | 1% | – |
| KL-L900 | – | – | – | 0.3% | – |
| KL-L1600 | – | – | – | 0.2% | 0.8% |
| KL-L1820 | – | – | – | 0.2% | 0.8% |
| KL-L2300 | – | – | – | 0.1% | 0.7% |
| KL-L2600 | – | – | – | – | 0.6% |
| KL-L3500 | – | – | – | – | 0.5% |
Material compatibility
Compatible with most metals and rigid polymers. Choose elastomers with little extractable plasticizer; fluorinated plastics and elastomers can absorb the fluid over time.
Storage and safety
Store sealed, away from acids, strong bases and oxidizers. Stable in service up to about 300 °C; above that PFPE can release HF, so ventilate.
Packaging
KL-E: 4 kg (3 L) and 25 kg (20 L) drums. KL-L: 3 L and 20 L bottles, shipped as non-hazardous goods.
Tell us what you use now
Send the product name, operating temperature and volume. We match a grade, send the TDS and SDS, and quote a sample.